Boost Reference Fuel Pressure System

Fueling - Boost Reference Fuel Pressure System

Boost Reference Fuel Pressure System

3 reviews
Model
Year
Regular price $299.99
/
  • Low stock - 2 items left
  • Inventory on the way

The ZZPerformance Boost Reference Fuel Pressure System (BRFPS) easily installs into your Cobalt or Redline allowing fuel pressure adjustment above the PCMs range of adjustment.  We prefer the "manifold regulated pressure" way of installing it, this lowers fuel pressure at idle to cure large injector idle issues and raises fuel pressure under boost to help fuel high HP applications. Required for LSJ's running over 17psi of boost or LE5's over 12psi.

Manifold regulated fuel pressure:
For this installation method, the factory in canister regulator is bypassed. This requires dropping the tank and bypassing the factory 60psi regulator. When the canister is removed, open the canister and clip off zip ties holding the clips on the regulator. Now open the regulator to expose ball and spring tab, next remove ball and spring tab, then clip fuel diverter back on and re-install canister.
It comes with a reel of flexible steel tubing that you can run from the engine, all the way to the back where the regulator is located.
When everything is installed set your fuel pressure to ~42psi at idle under full vacuum, and rise 1:1 under boost. This requires PCM reprogramming.

So how and why does this kit work? What is it actually doing?

The PCM doesn't compensate for boost over 17.5psi (12psi on LE5), so the car begins to go lean after that because the PCM file does not see more boost above the 17.5psi. This is unless you raise fuel pressure the same amount as boost, which is exactly what our BRFPS does. You can try and tune around the 17.5+psi but it's guess work and a very poor solution.

Customer Reviews
5.0 Based on 3 Reviews
5 ★
100% 
3
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • evap kit
  • LSJ-T
  • fueling
  • platform
  • plenty
  • solutions
  • 10/10
  • love
  • factory
  • everything
DJ
08/16/2021
Dyllan J.
United States United States

Great Product, Easy Install

Awesome quality. Add to evap kit made it super easy to install, makes sure my LSJ-T has plenty of fuel to get the job done. Love being able to use the factory PCM on this platform with the creative solutions offered to us. 10/10 recommend.

EG
05/25/2020
Elijah G.
Canada Canada

Worked like a charm

Super easy to install on the car. Tuning was a bit tricky to get dialled in but once everything is in line it was great to see consistent fueling

JV
06/19/2017
Joshua V.

So worth the pain it was to research and create a whole new fuel system. Worth every penny...

This may be a lengthy review... Mainly, it was very confusing how to set up and install the regulator. The model I used had the 3/16th fuel line. The regulator is a very nice piece and even has a port to install a pressure gauge. The photos just don't show it on the back side. The instruction were lack luster to say the least and the instructions from Fuelab were set up for a V8. Most of the info online left me searching for more answers. I did contact ZZP customer support for further instructions and help. They did provided me with a few more bits of literature to read and chew on. Ultimately, I ended up having to run down to my local old dude hotrod shop here in St. Louis to get some old gear head knowledge. Ended up running the set up as follows.... This is just a brief and very cut down version of what I did. First I cut and removed all of the steel fuel sender lines running along side the bottom of the car and removed the stock fuel rail and all its parts. Switched to a different fuel filter at the back of the tank that had 2 - 3/8ths push on fuel connectors, 1 for the stock return evap line and 1 for running my new line feed line. I then used adapters from 3/8ths fuel line to a -6AN hose connector and than ran a -6AN braided stainless steel line to the front of the Cobalt's engine bay as my new fuel sending line. Then connected the new feed line to an OBX R fuel rail using a -6AN adapter to a NPT fittings. Fuel rail is now fed... well after heavy modification to the OBX R fuel rail. It won't fit with out some machining work. Now moving the fuel out of the other side of the fuel rail I ran another stainless steel line to the input of the fuel regulator (middle port using the photo above). Next I used my adapters to run yet another stainless steel line from the return port of the regulator to the back of the car ( bottom port). The I drilled a hole in the gas tank and mounted a -6AN bulkhead fitting connecting the return line to the gas tank and kept all emission systems in tack. Next was supplying the Boost Reference regulator with some boost. Here's where it got tricky since I was also running a new mechanical boost gauge. I took the boost line coming out of the intake manifold located just below the fuel rail and ran that to my vacuum block manifold. That way I can run multiple boost/vacuum lines. So, basically just took the intake boost hose and put in a tee fitting and connected the system. I know this could of been way more detailed or posted a tutorial online. But, I enjoyed the problem solving of making this work and hopefully this is a descent outline for how you should plan way way way a head before under taking a complete fuel system reconfiguration job. All in all I couldn't be happier with the regulator and was a nice piece to my fuel system build up.

More from Ecotec
Electronics - PCM Update
Electronics - PCM Update
PCM Update - Ecotec
$60.00
7 reviews
Electronics - ZZP 1.0 LSJ PCM
ZZP 1.0 LSJ PCM
from $209.99
49 reviews
Electronics - ZZP LNF Turbo PCM
ZZP LNF Turbo PCM
from $209.99
203 reviews
Electronics - ZZP 1.0 2.2/2.4 PCM
ZZP 1.0 2.2/2.4 PCM
from $159.99
25 reviews
Electronics - ZZP LHU Turbo PCM
Electronics - ZZP LHU Turbo PCM
ZZP LHU Turbo PCM
from $209.99
20 reviews
Electronics - ZZP LTG Regal Turbo PCM Test
Electronics - ZZP LTG Regal Turbo PCM Test
ZZP LTG Regal/Malibu Turbo PCM
from $294.99
3 reviews
Recently viewed