Race Pellet

ZZ-RCPEL $19.99
Regular price $19.99

 

The ZZP race pellet is meant for use in Series II supercharged applications with a ZZP PCM. Since inception, all ZZP PCMs have had a table added to them to give 4 extra degrees of timing (putting you around 21 degrees). Dyno testing has show this to give ~20HP on a lightly mod'd 3800. To run this timing pellet you must use race gas or detonation and engine damage can occour. We recommend 100 octane or higher, unleaded race gas.

To install, simply unplug the intake air temp sensor and plug in this pellet to the two wires. If you do this with the car on, it will set a check engine light.

We add the extra timing in the IAT section of our ZZP 1.0 pcm, but no worries, it is added in the -20* section, so you will not get the added timing unless this is plugged in.


We have measured 20HP gains which equate to around 2 mph in the 1/4 mile.

 

*Does not work with naturally aspirated PCMs, or Series III (04+ Grand Prix) cars.

 

 

The ZZP race pellet is meant for use in Series II supercharged applications with a ZZP PCM. Since inception, all ZZP PCMs have had a table added to them to give 4 extra degrees of timing (putting you around 21 degrees). Dyno testing has show this to give ~20HP on a lightly mod'd 3800. To run this timing pellet you must use race gas or detonation and engine damage can occour. We recommend 100 octane or higher, unleaded race gas.

To install, simply unplug the intake air temp sensor and plug in this pellet to the two wires. If you do this with the car on, it will set a check engine light.

We add the extra timing in the IAT section of our ZZP 1.0 pcm, but no worries, it is added in the -20* section, so you will not get the added timing unless this is plugged in.


We have measured 20HP gains which equate to around 2 mph in the 1/4 mile.

 

*Does not work with naturally aspirated PCMs, or Series III (04+ Grand Prix) cars.

 

You are viewing a product listed on the following platform:

3800