ZZP Stage 1 Kit for Camaro

ZZ-STG1KCAM-16-INF-C $1,349.99
Cat Option
Vehicle Year
Core Charge
Regular price $1,349.99

This is a preprepared package of mods for your 2.0L Camaro.  It includes our PCM Tune, Cold Air Intake, and Downpipe.  The tune will modify the factory PCM file for extra horsepower and performance, the cold air intake will decrease intake air temps and reduce inlet restriction, and allow you to hear the turbo whistle, the downpipe will free up exhaust flow for more horsepower.  This package should give you an additional 60 horsepower over stock and you will lose nothing, in fact the car will run and drive even better than before along with better MPGs.  Very easy install, it should take less than 2 hours to install the entire kit.  The tune that is included is not a "mail order tune" this is a full remote tune.  This means each customers car is specifically tuned for their mods, their fuel, etc. 

Includes:

  • Cold Air Intake
  • Downpipe combo
  • Tune

    Tune:

    The ZZP 2.0 turbo PCM brings the performance of your car to a whole new level. We go through and rework dozens of tables based on countless dyno tuning with our own vehicles. We currently have the worlds fastest ATS and Camaro enabling us to dial in our tuning better than any other company in this market.

    • Variable valve timing optimized for better response and more power
    • Fuel cutoff rpm limit increased
    • Power enrichment tables adjusted for a more consistent air fuel ratio
    • Spark timing optimized for premium fuel
    • Driver demand and torque tables adjusted for greater performance
    • Turbocharger settings adjusted for more boost
    • Fuel injection timing adjusted for higher airloads
    • Fuel pressure raised at high loads
    • Coolant thermostat settings adjusted for cooler engine temps
    • Fan settings lowered for cooler engine temps
    • PE engagement time is reduced
    • 40HP gain over stock file on Premium fuel

       

      Cold Air Intake:

      If you are looking for an entire replacement intake tube and air box, here is our 2.0 liter LTG cold air intake. It is made of aluminum to keep it nice and lightweight. The air box will make sure that the air filter is drawing cool air in instead of hot underhood air. Very easy install, it will take around 15 minutes or less, no tuning required.


      Downpipe:

      This o2 housing bolts directly to the turbo's outlet and then bolts to the factory downpipe. It is 3" in diameter, an o2 bung for your factory o2 sensor, and 100% stainless steel. We will be releasing a ZZP downpipe soon that will also bolt in place of the stock downpipe. The outlet flange is tapped just like the factory o2 housing for ease of install, you will not have to deal with trying to hold the bolt when tightening the nut in the tight engine bay.


      Stage 2 kit here. It adds our Intercooler kit and catback exhaust to your Stage 1 kit bumping it to a Stage 2 car.

      This is a preprepared package of mods for your 2.0L Camaro.  It includes our PCM Tune, Cold Air Intake, and Downpipe.  The tune will modify the factory PCM file for extra horsepower and performance, the cold air intake will decrease intake air temps and reduce inlet restriction, and allow you to hear the turbo whistle, the downpipe will free up exhaust flow for more horsepower.  This package should give you an additional 60 horsepower over stock and you will lose nothing, in fact the car will run and drive even better than before along with better MPGs.  Very easy install, it should take less than 2 hours to install the entire kit.  The tune that is included is not a "mail order tune" this is a full remote tune.  This means each customers car is specifically tuned for their mods, their fuel, etc. 

      Includes:

      • Cold Air Intake
      • Downpipe combo
      • Tune

        Tune:

        The ZZP 2.0 turbo PCM brings the performance of your car to a whole new level. We go through and rework dozens of tables based on countless dyno tuning with our own vehicles. We currently have the worlds fastest ATS and Camaro enabling us to dial in our tuning better than any other company in this market.

        • Variable valve timing optimized for better response and more power
        • Fuel cutoff rpm limit increased
        • Power enrichment tables adjusted for a more consistent air fuel ratio
        • Spark timing optimized for premium fuel
        • Driver demand and torque tables adjusted for greater performance
        • Turbocharger settings adjusted for more boost
        • Fuel injection timing adjusted for higher airloads
        • Fuel pressure raised at high loads
        • Coolant thermostat settings adjusted for cooler engine temps
        • Fan settings lowered for cooler engine temps
        • PE engagement time is reduced
        • 40HP gain over stock file on Premium fuel

           

          Cold Air Intake:

          If you are looking for an entire replacement intake tube and air box, here is our 2.0 liter LTG cold air intake. It is made of aluminum to keep it nice and lightweight. The air box will make sure that the air filter is drawing cool air in instead of hot underhood air. Very easy install, it will take around 15 minutes or less, no tuning required.


          Downpipe:

          This o2 housing bolts directly to the turbo's outlet and then bolts to the factory downpipe. It is 3" in diameter, an o2 bung for your factory o2 sensor, and 100% stainless steel. We will be releasing a ZZP downpipe soon that will also bolt in place of the stock downpipe. The outlet flange is tapped just like the factory o2 housing for ease of install, you will not have to deal with trying to hold the bolt when tightening the nut in the tight engine bay.


          Stage 2 kit here. It adds our Intercooler kit and catback exhaust to your Stage 1 kit bumping it to a Stage 2 car.

          You are viewing a product listed on the following platform:

          ATS-Camaro