This is a set of ACL Aluglide (aluminum silicon) main bearings for your 2.2/2.4 Ecotec engine. These are standard sized to be used with the OEM crankshaft.
Fits: 2.2L Ecotec L61, LAP, LE8; and 2.4L Ecotec LE5, LE9.
From ACL: Aluminum Tin materials have been around since the 1960s. They have traditionally been the choice of Japanese and European manufacturers for low load, gas, passenger cars. As the loads developed by high horsepower late model engines increased, so too did the need for a stronger bearing material. Copper lead Trimetal bearings have been the answer for higher load applications and today make up ACL’s current range of Duraglide® and Race Series engine bearings, but as the world becomes more environmentally conscious, the need for lead free engine components has increased, without sacrificing the load carrying capacity required for modern engines. The addition of silicon as an alloying element to the Aluminum Tin family of bearing materials has elevated it to the next generation of performance materials. This is currently the choice of most Original Equipment (OE) manufacturers as the global mandate to have Lead free vehicles is enforced.
In keeping with these global trends, ACL Bearing Company commenced a development program in the late 1990's to provide a high strength aluminum based lead free material that provided a suitable alternative to traditional bearing materials & to provide all customers with a solution to their tribological needs. The introduction of Aluglide™ bearings is another example of ACL’s commitment to understanding and adapting to customer requirements. ACL’s new Aluglide™ engine bearings combine the proven advantages of aluminum tin metals with silicon to make this the very latest generation high performance alloy and have met with global response which proves these Australian developed and made components are at the leading edge of a competitive international industry.
Made by ACL Bearing Company in Tasmania, Aluglide™ aluminum tin silicon bearings are sold to both local and overseas markets. In the short time since being released, Aluglide™ has met with great success from both OE built engines and those rebuilt in the aftermarket. Aluglide™ bearings are ideally suited to general purpose applications (passenger cars and light commercial vehicles). One of the reasons why Aluglide™ has been such a positive achievement is due to ACL Bearing Company’s in-house research & development, further refining the alloy for a winning advantage over the competition. It features a strip cast microstructure which is the result of the inclusion of alloying elements and careful heat treatment. This gives superior bonding surfaces, particularly between the aluminum bond layer and the steel which are then optimized and remain that way to handle long term maximum loads. Put simply, the new bearings can take a higher load in the way the stress is transmitted to the steel. Additionally, the harder surface of the tough alloy gives substantially reduced wear and minimizes any possible shaft abrasion, resulting in an extended service life. Product Specs: Constructed of Aluminum Tin Silicon Meets or exceeds OEM quality.
Fits: 2.2L Ecotec L61, LAP, LE8; and 2.4L Ecotec LE5, LE9.
From ACL: Aluminum Tin materials have been around since the 1960s. They have traditionally been the choice of Japanese and European manufacturers for low load, gas, passenger cars. As the loads developed by high horsepower late model engines increased, so too did the need for a stronger bearing material. Copper lead Trimetal bearings have been the answer for higher load applications and today make up ACL’s current range of Duraglide® and Race Series engine bearings, but as the world becomes more environmentally conscious, the need for lead free engine components has increased, without sacrificing the load carrying capacity required for modern engines. The addition of silicon as an alloying element to the Aluminum Tin family of bearing materials has elevated it to the next generation of performance materials. This is currently the choice of most Original Equipment (OE) manufacturers as the global mandate to have Lead free vehicles is enforced.
In keeping with these global trends, ACL Bearing Company commenced a development program in the late 1990's to provide a high strength aluminum based lead free material that provided a suitable alternative to traditional bearing materials & to provide all customers with a solution to their tribological needs. The introduction of Aluglide™ bearings is another example of ACL’s commitment to understanding and adapting to customer requirements. ACL’s new Aluglide™ engine bearings combine the proven advantages of aluminum tin metals with silicon to make this the very latest generation high performance alloy and have met with global response which proves these Australian developed and made components are at the leading edge of a competitive international industry.
Made by ACL Bearing Company in Tasmania, Aluglide™ aluminum tin silicon bearings are sold to both local and overseas markets. In the short time since being released, Aluglide™ has met with great success from both OE built engines and those rebuilt in the aftermarket. Aluglide™ bearings are ideally suited to general purpose applications (passenger cars and light commercial vehicles). One of the reasons why Aluglide™ has been such a positive achievement is due to ACL Bearing Company’s in-house research & development, further refining the alloy for a winning advantage over the competition. It features a strip cast microstructure which is the result of the inclusion of alloying elements and careful heat treatment. This gives superior bonding surfaces, particularly between the aluminum bond layer and the steel which are then optimized and remain that way to handle long term maximum loads. Put simply, the new bearings can take a higher load in the way the stress is transmitted to the steel. Additionally, the harder surface of the tough alloy gives substantially reduced wear and minimizes any possible shaft abrasion, resulting in an extended service life. Product Specs: Constructed of Aluminum Tin Silicon Meets or exceeds OEM quality.
Recently viewed