Skip to main content

Your Cart

Your cart is currently empty.
Click here to continue shopping.

ATS Intercooler Kit

Intercooling - ATS Intercooler Kit
Intercooling - ATS Intercooler Kit
Intercooling - ATS Intercooler Kit


  • Intercooler with brackets
  • Silicone heavy duty replacement couplers
  • Premium stainless T-bolt clamps
  • Hot side charge pipe
  • Cold side charge pipe
  • All hardware needed to make the proper connections

This is a bolt on kit for your RWD or AWD ATS 2.0L turbo that replaces your hot and cold side charge pipes and front mount air to air intercooler.

It retains the use of your stock bypass valve. There haven't been any measured gains by replacing the bypass valve with an aftermarket BOV (Blow Off Valve).

The stock IC core dimensions are 21 5/8" w x 16" h x 1 1/4" thick and the ZZP core dimensions are 23 1/2" w x 9 1/2" h x 4" thick. Please take into account that this measurements do not include the end tanks. Will not fit on 2.0L CTS's as there is not enough room for the larger core with the stock bumper cover. 

CLICK HERE for Digital Install Instructions

Intercooling - ATS Intercooler Kit
Intercooling - ATS Intercooler Kit
Intercooling - ATS Intercooler Kit
Customer Reviews
4.9 Based on 31 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • Intercooler
  • Instructions
  • difference
  • radiator
  • downpipe
  • parts
  • everything
  • help
  • bumper
  • quality
Michael B.
United States United States


The directions where great I definitely feel a difference took a afternoon with 2 people I wouldn't even attempt to try it urself

ZZPerformance ATS Intercooler Kit Review
Aaron P.
United States United States

2013 ATS4 2.0T - FMIC

Nice FMIC, installed easily. Alignment of pipes is pretty good, clamps are nice. Only downside to my order, the washers were not included for some reason and ****** enough, I actually did NOT have any on hand so I had to go to town. Normally it might not be a big deal for most except for me a drive to the hardware store is 20 minutes 1 way. So I basically had to burn time, fuel, and a few bucks for washers. That aside, It looks nice, was built nice, and super easy to follow the instructions. I do like the way it turned out and would buy again. PS, the photo shows a 90' elbow for vacuum assuming for a boost gauge. Mine did not have that either so that may not be included anymore?

ZZPerformance ATS Intercooler Kit Review
Michael H.
United States United States

Ats intercooler

Great fit, not to hard to install,

sean w.
United States United States

Another Quality Product

Install was straightforward - replaced radiator with ZZP at same time - much larger inter cooler!

Derick F.
United States United States

Make this one of your first performance upgrades, you will not be dissapointed.

I agree with another reviewer below, this should be one of the first performance upgrades, especially if you live in warm weather! I upgraded to a ZZP radiator at the same time and glad I did as I was able to install both during the same install. Since you have to remove the bumper for the install which is probably one of the hardiest parts, di yourself a favor and replace the radiator at the same time. Neither my Intercooler nor radiator needed to be replaced but I can definitely feel the difference in performance with the ZZP intercooler and feel much better with a stainless steal radiator as the OEM radiator on the ATS has plastic sides and tends to leak after time. The intercooler can be install in your home garage, be patient and give yourself plenty of time. It took me a couple days myself but can be done in probably 6 hours with help from a buddy. There are several steps but overall easy install with good instructions that come with photos, also ZZP is has great customer service for phone questions or by email. As previous reviews state, it looks awesome peaking though the grill and pretty unbelievable that the stock location of the intercooler is smashed between the condenser and radiator. ZZP's intercooler and instructions relocate the intercooler in front and a bit lower, using existing hardware and custom high quality hardware to mount it. I honestly could not be happier with this intercooler and learned a lot about the front of the ATS during install!