- charge pipe
GM S1 Working, Not too Difficult to Install
This was a fairly straightforward install on my '09 SS Turbo with some slight changes. The harnesses are too long but they make the right connections. A long screwdriver is needed for the bottom end and some modification to the part to make it fit well there. There is only one spot for screw on the topside vs. 2 in the stock modult as these don't match perfectly either but it will wiggle in and do the job. Here's a link to a video I used to help with the install: https://www.youtube.com/watch?v=qQXsnVvEZPw&t=7s&ab_channel=JosephDiFeo
As described works great so far. Seeing 25psi with trifecta tune and this sensor. The wiring harness makes everything look clean and stock.
Broken on Arrival
The TMAP sensor had 1 bent pin and the MAP sensor had the pin on the connector pop out. I just went ahead and soldered all the connections. Other than that, everything worked fine.
3 bar Bosch sensors
They work great, as do the connector extensions.
Dropped right in. Worked like a champ. As it should be.