Kappa 12.25" Front Brembo Big Brake Kit

This is a complete kit with everything needed to install "LNF" Brembo brakes on your Kappa chassis vehicle. The kit comes with a specially machined rotor in house to fit on the kappa knuckle. Fitment is tested and fully hub-centric so you don't have to worry about any alignment or fitment issues. The factory kappa rotor is 10.9" in diameter.

Includes:

(2) 12.25" Custom ZZP Machined Cross drilled and slotted rotors
(2) Brembo calipers
Banjo bolts and Copper washers
(2) Wheel bearing spacers
PowerStop brake pads

This rotor will REQUIRE that you either remove your stock dust shield, or trim a small section that tabs outward for clearance. Our instructions include in-depth pictures and description on how to easily do this with common hand tools.

Make sure to verify the clearance between the caliper and the backside of the wheel. Some applications require wheel spacers (not included). Stock Sky Redline wheels will need a spacer to fit.

Fitment:

Pontiac Solstice 2006, 2007, 2008, 2009

Saturn Sky 2006, 2007, 2008, 2009

Opel GT 2007, 2008, 2009

Daewoo G2X 2006, 2007, 2008, 2009

Customer Reviews

5 Based on 13 Reviews

5 ★

100%

4 ★

3 ★

2 ★

1 ★

Write a Review Ask a Question

Reviews
Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

package
customer
work
forums
spacer
improvement
wheel spacer

04/05/2020

Steve C.

United States

Outstanding

Got these painted up and installed, bearing spacer fits perfect. No wheel spacer necessary, with ball joint heart shields and coo!ing vents it's a great package. One more improvement to add to the countless allready. Keep up the great work, Loyal customer, Steve. 07 ss sc lsj

07/18/2019

Jessi H.

United States

Brembos

Makes sure bleeders are on top I see a lot of people on forums saying hard or impossible to bleed them it’s because you can install on either side but bleeders have to up top to bleed them properly

03/08/2019

Ryan W.

Warning - There are two different sets of spacers / discard one set

Inside the brake pad box will contain all of your small parts Inside that box I had 2 sets of spacers, 4 total 1 pack of 2 is for LNF cars 1 pack of 2 is for LSJ cars Make sure if you have an LSJ car you use the LSJ spacers as the bolt holes and center ID is different One pack of my spacers didn't come in a bag labelled for some reason and it created a huge amount of confusion You only use 1 spacer provided + the OEM one behind the wheel bearing. So that's a total of 2 spacers used per side Verify your rotor is centered inside the caliper Only thing I wish is these came red, but it's nothing some Eastwood red caliper paint can't take care of Good kit, recommend getting the stainless braided lines to accompany this kit

10/29/2018

Ronald R.

Brembo front brake kit

Every HHR SS with 300+ HP needs this Brembo brake kit.

07/16/2018

Aryn P.

Money well spent

Parts were all packaged very well. Installation was easy. Bought this kit to replace the Brembos I already had on my HHR SS (105,000 miles). Original set was leaking and pins were seized (live in the salted north). This new set should out live the car. Bottom line, given what everyone else sells the Brembo calipers for by themselves, this $600 package is a great deal for anyone looking to replace or upgrade. Thanks to the ZZP crew for answering all my brake and suspension questions leading up to this purchase (I also bought a slew of suspension parts from ZZP with this kit for a suspension overhaul)

Your Cart

Kappa 12.25" Front Brembo Big Brake Kit

Thank you for submitting a review!