ZZP ATS-V Front Sway Bar

Suspension & Brakes - ZZP Front Sway Bar
Suspension & Brakes - ZZP Front Sway Bar
Suspension & Brakes - ZZP Front Sway Bar
ZZP ATS-V Front Sway Bar

ZZP ATS-V Front Sway Bar


Vehicle
Regular price $169.99
/
  • In stock, ready to ship
  • Inventory on the way

Once you add some basic handling mods such as lowering springs, upgraded struts, better tires, etc, it becomes increasingly important to consider upgrading your sway bars. As you improve the ability of your car to stick to the road, you will notice an increase in body roll (or sway/lean). This is where a stiffer/larger sway bar setup becomes beneficial. Sway bars work by distributing the upward/downward force of the car evenly from left to right, in an attempt to keep the car level (eliminate the heavy lean, or body roll while turning) the factory sway bars are sufficient for a factory suspension/tire setup, but once you change things out, they are no longer stiff enough. This is where the larger diameter/stiffer sway bars come in, they will help keep all 4 tires planted firmly on the pavement, and drastically improve your cars handling ability. The ZZP sway bar will transform your every day driver into a vehicle worthy of a road course.

Sway bar 101: This is assuming you have a properly setup front/rear spring rate and good shocks/struts...  For example, lets say you are coming into a corner fast and want to make the turn.  If the car tends to understeer (front pushes/does not turn) you will want to increase the rear sway bar stiffness.  People generally prefer oversteer (rear swings out) in a corner in a front wheel drive car because you can always accelerate out to control the amount of oversteer.  If the car oversteers a lot, then increase the front sway bar.

The stock (non ATS-V) front sway bar is 23mm and our ZZP bar measures 27mm.

The "Rear Wheel Drive" version also fits 6th Gen Camaro.

Comes with new bushings and brackets. There are many different trim levels of the ATS and multiple variations throughout the years. With these variations came different mounting provisions across the years. We include a bracket that fits on MOST variants of ATS, but if the included bracket does not fit you can re-use your stock bracket. If you have any questions, please reach out to customerservice@zzperformance.com. 

We recommend upgrading to our ZZP rear sway bar at the same time. That can be found here.

More from ATS-V
Electronics - ZZP ATS-V PCM Tune
Electronics - ZZP ATS-V PCM Tune
ZZP ATS-V PCM Tune
from $484.99
1 review
ZZP Stage 1 Kit for ATS-V
from $1,724.90
6 reviews
ZZP ATS-V Downpipes - V2
from $699.99
ZZP ATS-V Dual 3 Inch Stainless Steel Catback Exhaust
from $1,749.99
9 reviews
Air Intake - ZZP ATS-V Cold Air Intake
Air Intake - ZZP ATS-V Cold Air Intake
ZZP ATS-V Cold Air Intake
$599.99
22 reviews
Sold Out
ZZP ATS-V Auxiliary Fuel Kit
from $1,999.99
Recently viewed