The ZZP 1.0 PCM gives you the most requested and sought after features in a PCM. Buying from ZZP ensures nearly instant response on emailed questions, fast turnaround, and prompt core refunds. The ZZP 1.0 PCM is backed by a company you can trust. 1.0 files do not come with any tech or programming support for changes or issues outside 1.0 tuning parameters. We do not tune custom forced induction setups for with our 1.0 PCM; this PCM and tuning is designed for the ZZP turbo kit and ZZP supercharger kit for the 2.2/2.4 cars. Any questions please contact customerservice@zzperformance.com

Features:

• Raised rev limiter (7000rpm on stock valve springs)
• Fan turn on temperatures modified
• MAF calibration per intake brand (if available)
• WOT fueling modified
• WOT timing modified
• Torque abuse modes are modified to eliminate bog at launch
• Power enrichment tables modified for specific NA or boosted setups
• Injector charts modified
• "COT" removed
• "Burst KR" removed
• Shift points modified (auto only)
• Trans line pressure modified (auto only)

Notes:

• Electrical items are non returnable.
• PCMs are flashed on a per order basis and once shipped they are non-returnable. Warranty replacements are offered for 1 year on defective products.
• If you select the option of us sending you a bin file, and then ask for it again at a later date, there will be a $25 service fee.

How to order your ZZP 1.0 pcm:

VIN #: Please type your VIN # in the box.

Model: Please select the proper model of your car.

Year of car: Please select the correct year of your car. We cannot flash any 2.2 PCM before 2007, only 2007+

Core charge: Due to the vast models and options we do not offer shipping a core PCM. However, we have two options, you could ship us your PCM core to read/tweak or you could rent or purchase a tuning interface and laptop from us. If you rent our programming interface it will come with detailed instructions. Upon returning the interface or laptop, you are refunded the core charge (deposit). If you do not have a Windows based laptop. you can rent one from us. The advantage of using ours is that it is pre-configured with scanning software and tools to help us assist you if you have any questions or custom tuning requirements. When you receive the Interface you can follow the instructions to read your PCM file and email it to us for modifications, then we will email you back a modified file, you will upload that and scan the car (also using the interface) and email us the scan to verify the PCM changes and we can modify the file based on your scan from there. If you choose to keep the tuning interface and/or the laptop, that's fine. That core charge in that case will not be refunded. Core charges are based on 10 days and there will be additional charges if cables or laptops are kept for longer periods. After 30 days, core charges convert to purchases. HPTuners interface comes with the appropriate amount of credits needed for your vehicle. 

Sending in core first note: When choosing this option you must send us YOUR CORE from YOUR vehicle, not a random PCM from a junkyard or eBay. There are advantages to sending in your core, like not having to do a security relearn, no crank relearn, etc. If you send us a core that is not out of your vehicle it will likely not work correctly. 


Custom Engine Swaps: This option is for anyone looking to tune a vehicle that did not come with a 2.2/2.4 Ecotec originally. You MUST choose this option if you are tuning a tube chassis car, sand rail, Ecotec engine retro fit into an older chassis, DF Goblin, etc. Do not try to cheap out and purchase a tune from another year/make/model, we will find out and will not continue the tuning process if so. Be aware that when you purchase and start the remote tuning process you are purchasing our tuning services, not diagnostic services. The tune will be put together assuming you have all necessary sensors, boost lines, vacuum lines, etc hooked up correctly. Once you and the tuner have verified that the car is running well and you're both happy with the tune you have 7 days to request any changes. Once that 7 days has run up you can re-purchase our tuning services for your custom swap for $200. 

Injector size: Please select the injector size that you are planning on using.

Transmission: Please select Manual or Auto transmission. If you select "sending PCM first" make sure to send in your TCU with the ECU.

Power adder: This determines what power adder if you have one you have, super/turbo-charged or nitrous. We only offer super/turbo-charged files for our ZZP kits, if you are not running our MAF housing and kit, then most likely it will be beneficial to scan and tweak our file based on your custom setup.

Throttle body: If you are running the stock or LSJ throttle body. The throttle body scaler table must be modified if it is changed.

Fuel Used: This is the option that determines what octane gasoline or E85 you will be running. If you convert to E85, make sure that you drain all of the gas out of your tank before switching. Also please read our tech article about "E85".

Air Intake: If we have a specific tune available for your brand intake we will put the correct MAF chart in the PCM file. Anytime the MAF tube is changed it effects the airflow to the MAF sensor and will effect your fuel trims and WOT fueling.

ATTN Dirt Track Racers: Our 1.0 bench flash PCM (sending PCM first) is not intended for dirt track race cars or other motorsports. These 1.0 files are intended for street cars, and the tuning a car intended for dirt track racing is vastly different. We CAN accommodate for whatever racing you are doing, however this needs to be done via HPTuners email file. If you have any questions please reach out to customerservice@zzperformance.com. 

Click here to see how remote tunes are completed

Click here for HPTuner instructions

Click here for instructions on how to change your HPTuner scanner Config

FAQ

1. Can I change your PCMs with my tuning software?
Yes. We do not lock our PCMs. In fact, we will assist you with the tuning of our 1.0 file if you need help. You can email us your .hpt file and we'll help you if you get stuck. We could even review scan logs and offer advice if our file was purchased.

2. What do the cam files have different?
Further raised rev limiters, P0300 code eliminated and fueling adjusted for a smoother idle with correct LT trims.

3. Will I need a CASE learn?
Most cars do not require a CASE learn but it is recommended. If you get a check engine light for a P0315 code after installing the PCM, then a CASE "crankcase variation" learn is mandatory. 90+% of cars do not HAVE to have a CASE learn. We offer CASE learns for no charge if you are buying our PCM and in the Grand Rapids, MI area. If you want to avoid the chance of having to do a case learn, then select "sending in core first" on the core charge drop down and send us your pcm core to flash. A CASE learn syncs the PCM to the crank sensor.

4. What if I don't like something about my PCM?
Cars of the same year and type can vary. If you receive your PCM and would like the fuel trims dialed in or one of the modifications that is standard to this PCM changed; simply ship the PCM back within 30 days and we'll make the change at no charge. We would need details on what you would like changed in a detailed note with it though. All you'll owe is the return shipping money.

5. Will I pass emissions with this PCM?
Yes, if you could pass before, you will after. This PCM does not alter emissions.

6. How strict are you on the core charge?
If you have to send back your PCM because of an issue, or are in process of checking something out with the PCM, or working with us on adjusting the file with your tuning software, we will gladly allow you extra time to return your core. If you have an issue with your PCM or install, the core return allowance of 14 days will be extended until the issue is resolved.

7. My car has different gears, do I need the PCM modified?
No. The speed sensor is on the output of the transmission.

8. What octane do I need to run?
If your car is supercharged, or turbo'd premium gas is required. The higher the octane of premium, the better. Unleaded race gas works well for further improved performance.

9. How do I perform a security relearn?
For the seed key relearn, this is the procedure:

REFUNDABLE CORE INFORMATION:

A core charge will be added to the price of this item. The core charge is 100% refundable with the return of your original PCM within 14 days of receiving your PCM. Damaged, dirty or painted PCM core returns will be docked. If you have an issue with your PCM or install, the core return allowance of 14 days will be extended until the issue is resolved.

If you select "sending in core first" send core to:

ZZPerformance
Attn: Order # (order number goes here)
2450 28th st. SW
Wyoming, MI 49519

Sending in core first allows you to avoid having to have your car case learned (P0315) because it was done from the factory. A case learn should be done anytime the crank pulley is removed or the PCM core is swapped.

If using your own laptop for remote tuning, download the latest stable HPTuners VCM Suite here.

If you are having knock (KR) related problems during your remote tuning sessions we recommend using Boostane. Boostane is a safe octane booster that actually works, unlike the generic "octane boosters" found at your local auto parts stores. We have noticed large spikes in fuel inconsistency since the beginning of the pandemic, so sometimes it's hard to point out if there's an issue with the car being knock limited or just the quality of fuel. While tuning if you add Boostane and notice the KR subside, then your problem lies in your fuel. If you add Boostane and it has no noticeable effect on KR, then it is likely that your car has a mechanical issue that is causing and/or being sensed as knock.